Krystal® SL

Haps Compliant
Krystal

Krystal® SL High Solids Conversion Varnish was developed to be used on any wood surface where a durable, high-performance, moisture and chemical resistant finish is needed. Krystal® SL is a ready to spray water white, non-yellowing, HAPs compliant, two component amino-alkyd finishing system ideal for use on kitchen and bathroom cabinets, display fixtures, office, dormitory, household, institutional, and laboratory furniture.

Performance

  • VOC compliant
  • Fast drying to aid in production
  • Non-yellowing
  • Excellent moisture and chemical resistance
Product # SizeSheenContainerPDSSDSSell SheetsUPC
C133722-16 1 GallonDullCan035777206034
C133722-20 5 GallonDullPail035777206041
C133724-16 1 GallonSatinCan035777179505
C133724-20 5 GallonSatinPail035777179536
C133728-16 1 GallonGlossCan035777206126
C133728-20 5 GallonGlossPail035777206133
Purpose: Test the ability of the finish to withstand substances typically found in kitchens and bathrooms. Exceeds AWI specifications for household chemical resistance for SYSTEM 5 conversion varnish and SYSTEM 11 catalyzed polyurethane. Contact and dry time of each chemical is in accordance to AWI and KCMA test procedures.
Results
VinegarExcellent
Lemon JuiceExcellent
Orange JuiceExcellent
Grape JuiceExcellent
KetchupExcellent
CoffeeExcellent
Olive OilExcellent
Boiling WaterExcellent
Cold WaterExcellent
Nail Polish RemoverExcellent
Household AmmoniaExcellent
VM&P NaphthaExcellent
Isopropyl AlcoholExcellent
Wine Excellent
WindexExcellent
409 CleanerExcellent
LysolExcellent
33% Sulfuric AcidExcellent
77% Sulfuric AcidPoor
28% Ammonium HydroxideExcellent
GasolineExcellent
Murphy's Oil SoapExcellent
Vodka 100 ProofExcellent
1% DetergentExcellent
10% TSPExcellent
Ethanol/ WaterExcellent
MustardExcellent
AcetoneExcellent
Krystal has undergone rigorous quality testing to verify performance and application characteristics. The M.L. Campbell laboratory has formulated Krystal to meet or exceed the required performance levels established by KCMA for finishes. Krystal has been tested utilizing the following ASTM and KCMA test methods: 5=Excellent, 4=Very Good, 3=Good, 2=Fair, 1=Poor
Results
Print ResistanceExcellent
Hot & Cold Check ResistanceExcellent
Cross HatchExcellent
BlockingExcellent
Wet Heat ResistanceVery good
Edge SoakExcellent

Additional information

Application

Interior

Catalyzation

Post Catalyzed

Where to Use

Krystal® SL was specifically designed for interior wood surfaces that are exposed to moisture, heat and household chemicals. The different areas of use include: kitchen and bathroom cabinets, display fixtures, office, dormitory, household, institutional, and
laboratory furniture.

Finish Type

Clear Topcoats

Location

Interior

Category

Finishes

Performance

Solvent Borne

Technology

Conversion Varnish

Vehicle

Solvent Borne

VOC

275