POLARION™ Isolante Clear Sealer
M.L. Campbell® POLARION™ Isolante Clear Sealer is a two-component polyurethane that offers exceptional adhesion and acts as a tie or barrier coat. This clear sealer formula is specifically designed for interior wood surfaces that are rich in natural wood oils or otherwise marginally contaminated. POLARION™ Isolante Clear Sealer can be used as a sealer for table tops, bar tops, cabinets, millwork, furniture, fixtures, and other wood surfaces.
Performance
- Provides adhesion between substrate and topcoats
- Penetrates the surface of the wood for maximum adhesion
- Eliminates bleed through of resins and contaminants from the wood
- Can be used over wood and MDF surfaces
Sell Sheets | |
---|---|
English | |
French | |
Spanish |
Product # | Size | Container | PDS | SDS | EDS | UPC |
---|---|---|---|---|---|---|
000C38179-16 | 1 Gallon | Can | 035777474204 |
Additional Information
Interior
Interior wood finishes are high-quality coatings designed to protect and enhance wood surfaces within indoor environments.
POLARION® Products
Chemical Resistence Evaluation
Purpose: Meets AWI specifications for polyurethane chemical resistance. Meets KCMA specifications for withstanding substances, typically found in kitchens and bathrooms. Contact and dry time of each chemical is in accordance with AWI and KCMA test procedures.
Results | |
---|---|
Vinegar | Excellent |
Lemon Juice | Excellent |
Orange Juice | Excellent |
Grape Juice (24 hrs) | Excellent |
Ketchup (24 hrs) | Excellent |
Coffee | Excellent |
Olive Oil | Excellent |
Boiling Water | Excellent |
Cold Water | Excellent |
Household Ammonia | Excellent |
VM&P Naphtha | Excellent |
Isopropyl Alcohol | Excellent |
Wine | Excellent |
Windex | Excellent |
409 Cleaner | Excellent |
Lysol | Excellent |
33% Sulfuric Acid | Excellent |
77% Sulfuric Acid | Very Good |
28% Ammonium Hydroxide | Excellent |
Gasoline | Excellent |
Murphy’s Oil Soap | Excellent |
Vodka 100 Proof | Excellent |
1% Detergent | Excellent |
10% TSP | Excellent |
Ethanol/ Water | Excellent |
Mustard (24 hrs) | Excellent |
Acetone | Excellent |
Test and Performance Characteristics
POLARION has undergone rigorous quality testing to verify performance and application characteristics. The M.L. Campbell® laboratory has formulated this product to meet or exceed the required performance level established by AWI and KCMA for finishes. This product meets the AWI finishing standard System 11 for chemical and moisture resistance. This product has been tested utilizing the following ASTM and KCMA test methods: 5=Excellent, 4=Very Good, 3=Good, 2=Fair, 1=Poor.
Results | |
---|---|
Print Resistance | Excellent |
Hot & Cold Check Resistance | Excellent |
Cross Hatch | Excellent |
Blocking | Excellent |
Wet Heat Resistance | Excellent |
Edge Soak | Excellent |
Pencil Hardness | Excellent |