Product Category:

Miscellaneous

M.L. Campbell also offers specialty finishes, touch-up products, additives, reducers, retarders and catalysts to meet all of your wood finishing needs.

Choose Product Technology:

buttonSolvent Borne Products buttonWater Borne Products

Content loading...

Catalysts
Reducers
Retarders
Specialty Finishes
Additives
Touch Up
Catalysts
Additives
Clean Up
Polyurethane 2K

Displayed Products Have Been Limited to Water Borne

Displayed Products Have Been Limited to Solvent Borne

Care Catalyst: Product Information (PI) Sheets; Specially developed for the use with our post-catalyzed systems. Refer to specific system product data sheets and product labels for proper catalyst mixing ratios.
Care Catalyst Low VOC: Product Information (PI) Sheets; Was specially developed to catalyze all of our 275 and 550 low VOC post-catalyzed products. A more concentrated catalyst, so mixing ratios for this product should be followed carefully.
Euro Catalysts: Product Information (PI) Sheets; Specifically developed to be used with our Euro Series product line. Refer to specific Euro system Product Information (PI) sheets and product labels for proper catalyst mixing ratios, and pot life.
Clean Cure 5% Post-Cat Catalyst: Product Information (PI) Sheets; Specifically developed for use with M.L. Campbell Clean Cure Post-Catalyzed systems.

Standard Lacquer Thinner: Product Information (PI) Sheets; A high-quality special blend of solvents specifically designed to be an excellent reducer for nitrocellulose, pre-catalyzed, post-catalyzed, butyrate, and acrylic lacquers. It is tolerant of a wide range of poor application conditions, and will maintain good dry, flow, and blush resistance. Has a minimum tendency to raise the wood grain. The combination of properties minimizes the sanding required on lacquer sealer and between finish coats.
Care Reducer: Product Information (PI) Sheets; A premium blend of special medium evaporating solvents designed for specifically for reducing HAPs free pre-catalyzed and post-catalyzed finishes. The addition of small amounts will correct most leveling and flow problems. Contains no aromatic or ketone solvents.
Fast Lacquer Thinner: Product Information (PI) Sheets; An economy blend of solvents specifically designed to be used as a clean up solvent for nitrocellulose, pre-catalyzed, post-catalyzed, butyrate and acrylic lacquers. If used in our products, Fast Lacquer Thinner may cause flow, leveling and bubbling issues; therefore, it is recommended that it be used as a gun cleaner.
Flow Enhancer: Product Information (PI) Sheets; Premium slow reducers specially formulated for conditions of high heat and humidity. Consist of a quality blend of Glycol Ethers and Ester Solvents. Will effectively help to enhance the flow of our products and help to reduce bubbling and blushing caused by the effects of high heat and humidity during application. Flow Enhancer 1 will reduce dry spray and both will reduce lapping.
Medium Reducer VOC Exempt: Product Information (PI) Sheets; A blend of compliant VOC exempt solvents designed to improve flow and leveling in moderate heat and humidity conditions. Recommended for use with any of our low VOC coatings to improve flow and level.
Fast Reducer VOC Exempt: Product Information (PI) Sheets; A high quality VOC compliant acetone meant for reducing low VOC solvent borne coatings. Should also be used as a general purpose clean up solvent.
Euro Reducer: Product Information (PI) Sheets; A blend of special evaporating solvents specifically formulated for Euro Series two-component polyurethane products. Intended to correct most leveling and flow problems. Euro Reducer contains no aromatic or ketone solvents.
EuroBild® Epoxy Reducer: Product Information (PI) Sheets; A special HAPS-free reducer required for thinning EuroBild Epoxy Sealer that also includes additives that reduce bubbles during application. Due to the high solids nature of the EuroBild Epoxy Sealer, this solvent reducer must be used for optimum application and performance characteristics of the coating.

Care Retarder: Product Information (PI) Sheets; A blend of special slow evaporating solvents. The addition of small amounts will correct most leveling, flow and blushing problems. These problems are often the result of poor application conditions, extreme humidity or the use of inferior lacquer thinners. Contains no aromatic or ketone solvents.
BC Retarder: Product Information (PI) Sheets; A premium slow retarder specially formulated for conditions of higher heat and humidity. This product will effectively help enhance the flow of our products and will help reduce bubbling and blushing caused by the effects of high heat and humidity during application.
Slow Retarder VOC Exempt: Product Information (PI) Sheets; A blend of compliant VOC exempt solvents designed to improve the flow and leveling of low VOC coatings in high heat and humidity conditions. Recommended for use with any of our low VOC solvent based coatings to improve flow and leveling.
Euro Retarder: Product Information (PI) Sheets; A blend of special evaporating solvents which are intended to slow the drying of Euro Series polyurethanes and corrects most leveling and flow problems. Euro Retarder contains no aromatic or ketone solvents. Specifically developed to be use with our Euro Series product line.
Euro Super Slow Retarder: Product Information (PI) Sheets; A solvent blend designed to lengthen dry times to help correct any leveling, bubbling and flow issues in extreme tropical and desert conditions. Euro Super Slow Retarder is the slowest urethane-grade solvent blend M.L. Campbell offers.

Crackle Plus: Product Information (PI) Sheets; Designed to be added to any of our solvent based pigmented finishes to produce a crackle appearance. When Crackle coat is to be a deep color use our Crackle Lacquer.
Crackle Lacquer: Product Information (PI) Sheets; A clear tint base that can be tinted to various colors for use on interior wood and MDF surfaces. When Crackle coat is to be white or light color use our Crackle Plus.
Crack-L-ite: Product Information (PI) Sheets; A crackle medium that can be tinted to various colors for use on interior wood and MDF surfaces. This product is ideal for in demand spot crackling. Provides a sophisticated, subtle crackle that is not achieved with other crackle products.
Proxpeel Strippable Booth Coating White: Product Information (PI) Sheets; A peelable liquid plastic spray booth and masking coating supplied at spraying consistency. Offers excellent spray characteristics, dries in 10-15 minutes under normal room temperature conditions and is removable in large sheets.

Flattening Compound for Post-Cat Finishes: Product Information (PI) Sheets; A high efficiency flattening paste for use in post-catalyzed and pre-catalyzed topcoats. Features easy stir in and soft settling.
Flattening Compound for Nitrocellulose: Product Information (PI) Sheets; An efficient flattening paste for use in conventional nitrocellulose lacquers only. Features easy stir-in and soft settling. Not for use in pre-catalyzed and post-catalyzed lacquers.
Lacquer Fish Eye Killer: Product Information (PI) Sheets; Designed to help eliminate fish eye and help provide a smooth finish.
Natural Paste Wood Filler: Product Information (PI) Sheets; An excellent, fast drying, and tintable alkyd paste wood filler for use on open grain woods to fill open pores.

Spray Zits: Product Information (PI) Sheets; 12 ounce aerosol spray cans of clear lacquer finishes and shading lacquer toners. Fast, easy and convenient to use with no application equipment required. The four toner colors are specially-formulated to cover many of your requirements for touch up and furniture repair colors.

Aguabarnice® Catalyst: Product Information (PI) Sheets; Developed for use with our Aguabarnice Post-Catalyzed Water Borne Clear Lacquer.

Aquastar Water Borne Flow Additive: Product Information (PI) Sheets; A specially-formulated water borne flow additive that can be added to all our water borne products when necessary. Used for reduction (per direction of PI sheet) it will improve flow, leveling and spreading rate. Unlike reduction using only water, it will not raise wood grain or cause sagging.

WB Gun & Line Cleaner Concentrate: Product Information (PI) Sheets; Designed for the environment, Water Borne Gun & Line Cleaner Concentrate is used for cleaning and flushing water borne coatings from guns, fluid lines, pumps and for general cleanup.

Euro X™ Water Borne Impregnating Stain Tinters: Sell Sheets ( Eng ) | Product Information (PI) Sheets; Highly durable exterior grade tanslucent oxide pigments designed to provide various standard colors and also for inter-mixing custom colors.